X5程序发布问题

天夜殇

在X5.2.6平台下，我把X5.2.6的压缩文件解压出来之后，把tomcat，runtime以及model文件夹全部拷贝出来，然后放在一个新的文件夹test里面（3个平级），在tomcat里改了server.xml文件的数据源配置，结果启动Tomcat服务，登录8080端口，首页都不显示，这是怎么回事？

jishuang

截图看一下具体的现象

天夜殇

jishuang 发表于 2014-3-19 16:16
截图看一下具体的现象

jishuang

tomcat的server.xml发一下看看

fpj123

先检查TOMCAT是否启动正确；
  如果TOMCAT启动不正确你是无法访问的，
  TOMCAT启动不正确，多数是数据源配置不正确；端口冲突等问题；

最好把TOMCAT中的信息贴一下，大家帮你分析一下。

天夜殇

jishuang 发表于 2014-3-19 16:21
tomcat的server.xml发一下看看

<?xml version='1.0' encoding='utf-8'?>
<!--
  Licensed to the Apache Software Foundation (ASF) under one or more
  contributor license agreements.  See the NOTICE file distributed with
  this work for additional information regarding copyright ownership.
  The ASF licenses this file to You under the Apache License, Version 2.0
  (the "License"); you may not use this file except in compliance with
  the License.  You may obtain a copy of the License at

      http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
-->
<!-- Note:  A "Server" is not itself a "Container", so you may not
     define subcomponents such as "Valves" at this level.
     Documentation at /docs/config/server.html
-->
<Server port="8005" shutdown="SHUTDOWN">

  <!--APR library loader. Documentation at /docs/apr.html -->
  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />
  <!--Initialize Jasper prior to webapps are loaded. Documentation at /docs/jasper-howto.html -->
  <Listener className="org.apache.catalina.core.JasperListener" />
  <!-- Prevent memory leaks due to use of particular java/javax APIs-->
  <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" />
  <!-- JMX Support for the Tomcat server. Documentation at /docs/non-existent.html -->
  <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
  <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />

  <!-- Global JNDI resources
       Documentation at /docs/jndi-resources-howto.html
  -->
  <GlobalNamingResources>
    <!-- Editable user database that can also be used by
         UserDatabaseRealm to authenticate users
    -->
    <Resource name="UserDatabase" auth="Container"
              type="org.apache.catalina.UserDatabase"
              description="User database that can be updated and saved"
              factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
              pathname="conf/tomcat-users.xml" />
  </GlobalNamingResources>

  <!-- A "Service" is a collection of one or more "Connectors" that share
       a single "Container" Note:  A "Service" is not itself a "Container",
       so you may not define subcomponents such as "Valves" at this level.
       Documentation at /docs/config/service.html
   -->
  <Service name="Catalina">

    <!--The connectors can use a shared executor, you can define one or more named thread pools-->
    <!--
    <Executor name="tomcatThreadPool" namePrefix="catalina-exec-"
        maxThreads="150" minSpareThreads="4"/>
    -->


    <!-- A "Connector" represents an endpoint by which requests are received
         and responses are returned. Documentation at :
         Java HTTP Connector: /docs/config/http.html (blocking & non-blocking)
         Java AJP  Connector: /docs/config/ajp.html
         APR (HTTP/AJP) Connector: /docs/apr.html
         Define a non-SSL HTTP/1.1 Connector on port 8080
    -->
    <Connector port="8080" URIEncoding="utf-8" maxHttpHeaderSize="8192" compression="on"
               maxThreads="150" minSpareThreads="3" maxSpareThreads="15"
               enableLookups="false" redirectPort="8443" acceptCount="30"
               connectionTimeout="30000" disableUploadTimeout="true" compressableMimeType="text/html,text/xml,text/css,text/javascript,application/x-javascript,application/javascript,application/xml"/>
    <!-- A "Connector" using the shared thread pool-->
    <!--
    <Connector executor="tomcatThreadPool"
               port="8080" protocol="HTTP/1.1"
               connectionTimeout="20000"
               redirectPort="8443" />
    -->           
    <!-- Define a SSL HTTP/1.1 Connector on port 8443
         This connector uses the JSSE configuration, when using APR, the
         connector should be using the OpenSSL style configuration
         described in the APR documentation -->
    <!--
    <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true"
               maxThreads="150" scheme="https" secure="true"
               clientAuth="false" sslProtocol="TLS" />
    -->

    <!-- Define an AJP 1.3 Connector on port 8009 -->
    <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />


    <!-- An Engine represents the entry point (within Catalina) that processes
         every request.  The Engine implementation for Tomcat stand alone
         analyzes the HTTP headers included with the request, and passes them
         on to the appropriate Host (virtual host).
         Documentation at /docs/config/engine.html -->

    <!-- You should set jvmRoute to support load-balancing via AJP ie :
    <Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1">         
    -->
    <Engine name="Catalina" defaultHost="localhost">

      <!--For clustering, please take a look at documentation at:
          /docs/cluster-howto.html  (simple how to)
          /docs/config/cluster.html (reference documentation) -->
      <!--
      <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/>
      -->        

      <!-- The request dumper valve dumps useful debugging information about
           the request and response data received and sent by Tomcat.
           Documentation at: /docs/config/valve.html -->
      <!--
      <Valve className="org.apache.catalina.valves.RequestDumperValve"/>
      -->

      <!-- This Realm uses the UserDatabase configured in the global JNDI
           resources under the key "UserDatabase".  Any edits
           that are performed against this UserDatabase are immediately
           available for use by the Realm.  -->
      <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
             resourceName="UserDatabase"/>

      <!-- Define the default virtual host
           Note: XML Schema validation will not work with Xerces 2.2.
       -->
      <Host name="localhost"  appBase="webapps"
            unpackWARs="true" autoDeploy="true"
            xmlValidation="false" xmlNamespaceAware="false">

        <!-- SingleSignOn valve, share authentication between web applications
             Documentation at: /docs/config/valve.html -->
        <!--
        <Valve className="org.apache.catalina.authenticator.SingleSignOn" />
        -->

        <!-- Access log processes all example.
             Documentation at: /docs/config/valve.html -->
        <!--
        <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs"  
               prefix="localhost_access_log." suffix=".txt" pattern="common" resolveHosts="false"/>
        -->

        <Context processTlds="false" docBase="../../runtime/BusinessServer" path="/BusinessServer" reloadable="false">
          <Manager className="org.apache.catalina.session.PersistentManager" saveOnRestart="false" maxActiveSessions="-1" minIdleSwap="-1" maxIdleSwap="-1" maxIdleBackup="-1" >
            <Store className="org.apache.catalina.session.FileStore" directory="seskep"/>
          </Manager>
          <Resource name="demo" auth="Container" type="javax.sql.DataSource" driverClassName="net.sourceforge.jtds.jdbc.Driver" url="jdbc:jtds:sqlserver://127.0.0.1:1433/x5_Demo" username="sa" password="sa" maxActive="10" maxIdle="5"/>
          <Resource name="system" auth="Container" type="javax.sql.DataSource" driverClassName="net.sourceforge.jtds.jdbc.Driver" url="jdbc:jtds:sqlserver://127.0.0.1:1433/x5_Sys" username="sa" password="sa" maxActive="10" maxIdle="5"/>
        </Context>
        <Context processTlds="false" docBase="../../runtime/UIServer" path="/x5" reloadable="false">
          <Manager className="org.apache.catalina.session.PersistentManager" saveOnRestart="false" maxActiveSessions="-1" minIdleSwap="-1" maxIdleSwap="-1" maxIdleBackup="-1" >
            <Store className="org.apache.catalina.session.FileStore" directory="seskep"/>
          </Manager>
        </Context>
        <Context processTlds="false" docBase="../../runtime/ReportServer" path="/ReportServer" reloadable="false">
          <Manager className="org.apache.catalina.session.PersistentManager" saveOnRestart="false" maxActiveSessions="-1" minIdleSwap="-1" maxIdleSwap="-1" maxIdleBackup="-1" >
            <Store className="org.apache.catalina.session.FileStore" directory="seskep"/>
          </Manager>
        </Context>
        <Context processTlds="false" docBase="../../runtime/DocServer" path="/DocServer" reloadable="false">
          <Manager className="org.apache.catalina.session.PersistentManager" saveOnRestart="false" maxActiveSessions="-1" minIdleSwap="-1" maxIdleSwap="-1" maxIdleBackup="-1" >
            <Store className="org.apache.catalina.session.FileStore" directory="seskep"/>
          </Manager>
          <Resource name="doc" auth="Container" type="javax.sql.DataSource" driverClassName="net.sourceforge.jtds.jdbc.Driver" url="jdbc:jtds:sqlserver://127.0.0.1:1433/x5_Doc" username="sa" password="sa" maxActive="10" maxIdle="5"/>
        </Context>
      </Host>
    </Engine>
  </Service>
</Server>

jishuang

这个地址配置的正确吗？

天夜殇

jishuang 发表于 2014-3-19 17:02
这个地址配置的正确吗？

正确的啊，runtime是与tomcat平级的

jishuang

天夜殇 发表于 2014-3-19 16:20

用startup.bat启动正确吗？

天夜殇

jishuang 发表于 2014-3-20 09:17
用startup.bat启动正确吗？

命令框一闪而过